Table of Contents
Advertisement
Figure 72. Tensioner ramp/idler pulley zero point
4. Turn the primary chassis face down.
5. Remove the four mounting screws from the two belt block brackets as shown
Figure 73. Cartridge elevator belt block and brackets
6. Turn the primary chassis face up and remove the belt from the media elevator
7. Remove the belt tensioner components as shown in Figure 74 on page 79.
78
4560SLX Tape Library: User's Guide
The belt block brackets and fasteners are now visible through the access
cutout.
in Figure 73.
car and the tensioner ramp/idler pulley.
a. Remove the two screws and springs from tensioner ramp/idler pulley.
b. Remove the other two screws from the tensioner ramp/idler pulley.
c. Remove the tensioner ramp/idler pulley.
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
