IBM 4560SLX User Manual page 41

Tape library
Table of Contents

Advertisement

Figure 38. View Library Options screen (initial screen)
Table 2 describes the available Library options.
Table 2. Library options
Option
Library Stays Offline After
Power-up Initialization
Auto Power-up an Installed
Drive
Unload Mode
Total Reserved Slots
Auto Clean Mode
Drive and Slot Numbering
Library Mode
Sequential Mode
LCD Contrast Adjust
Mail Slot Mode
Description
The library does not go online after power-up initialization.
You must select the online option from the menu screen on
the touch screen. The default is disabled.
This option enables a tape drive to be automatically
powered up after replacing a tape drive. The default is
disabled.
This option selects the unload mode for library tape drives.
If the mode is implicit, the library unloads a tape drive
before attempting to move a cartridge from that tape drive.
If the mode is explicit, the host must issue a SCSI
UNLOAD command to a tape drive before each MOVE
MEDIUM command that removes a cartridge from that tape
drive. The default is implicit.
This option enables you to remove a specified number of
slots from use. Some host software impose size limits on
library magazines for licensing purposes. The default is 0.
This option enables you to establish an automatic cleaning
cycle. To use this option, reserve a slot for a cleaning
cartridge using the Total Reserved Slots option. The default
is enabled.
This option enables you to specify SCSI elements in the
library displayed as zero-based or one-based numbers. This
only affects the touch screen, not the actual SCSI addresses.
The default is one-based.
This option enables you to set the robotics operating mode
to random or sequential. The default is random.
This option enables you to select a normal or recirculate
frequency mode. The default is normal.
Note: This is only available if Library Mode is set to
sequential.
This option enables you to increase or decrease the contrast
of the LCD display.
This option enables the mail slots in a library. The default is
mail slot enabled.
Get other manuals https://www.bkmanuals.com
31
Chapter 4. Operation

Advertisement

Table of Contents
loading

Table of Contents