Table of Contents
Advertisement
Figure 34. Move Media screen
To move a cartridge, complete the following procedure:
1. Touch the Source box or Source Element Type from the Move Media screen.
Figure 35. Move Media screen (source)
2. From the Source Element Type area, select the element type you want to move.
3. Touch the Destination box on the Move Media screen. The Destination box
Figure 36. Move Media screen (destination)
4. From the Destination Element Type area, select the element type you want to
The Source box will change from gray to an active state as shown in Figure 35.
Drive 2 is used for this example.
will change from gray to an active state as shown in Figure 36.
move media to. Continue selecting the destination option until the desired
Get other manuals https://www.bkmanuals.com
29
Chapter 4. Operation
Advertisement
Table of Contents
