IBM 4560SLX User Manual page 43

Table 3. SCSI configuration options (continued)
Definition Option and default description
Library SCSI Bus This option enables you to set the library robotics
Parity SCSI bus parity checking.
SCSI Mode This option defines the loader as SCSI-2 or SCSI-3.
Mailslot access This option defines when the mailslot is accessible.
Unit Attention This option enables you to select reporting of all or
Reporting only one stacked-unit attention conditions. If set to
all, the unit reports all unit attention conditions in
sequence. If set to one, the unit reports only the
highest priority condition.
Init Element Status This option enables you to specify the library
response to the SCSI INITIALIZE ELEMENT
STATUS command. The possible settings are no
inventory, force inventory, and force label scan.
Test Unit Ready This option enables you to specify the response to a
Reporting TEST UNIT READY command if the library is in
sequential mode. The possible settings are standard
or custom. Standard returns check condition not
ready and custom returns good status.
Device Capability This option enables you to choose between two
Page Length lengths of the mode sense/select device capabilities
page (SCSI page 1Fh), which are short (14 bytes)
and long (18 bytes), to accommodate different SCSI
device implementations of this page.
Transport Element This option enables you to set the base address for
Base Address the robotics mechanism.
Storage Element This option enables you to set the base address for
Base Address the magazine slots.
Transfer Element This option enables you to set the base address for
Base Address the tape drives.
Import/Export This option enables you to set the base address for
Element Base the mail slot.
Address
Product This option enables you to specify the response of
Identification the library robotics to the SCSI INQUIRY command
in the product ID fields.
Vendor This option enables you to specify the response of
Identification the library robotics to the SCSI INQUIRY command
in the vendor ID field.
Post Recovered This option enables you to set the post recovered
Errors errors.
Get other manuals https://www.bkmanuals.com
Default value
Enabled
SCSI-3
Prevent/Allow
Medium
Command
Determines
Access
Report All
No Inventory
Standard
Short (14 bytes)
0
20
1E0
1C0
4560SLX
IBM
Disabled
33
Chapter 4. Operation