Table of Contents
Advertisement
Figure 23. SCSI ID selection screen
5. Select the button next to the SCSI ID you want to set. The screen will display
Figure 24. SCSI ID editing screen
6. Enter a new value for the SCSI ID. This places your request in the New data
7. Select Save. A confirmation screen appears on the display as shown in
Figure 25. SCSI ID Confirmation screen
8. Select OK to confirm. The newly selected SCSI ID flashes for a few seconds
22
4560SLX Tape Library: User's Guide
the current setting as shown in Figure 24.
field.
Figure 25.
while the drive is being updated, then remains solid indicating that the
operation is complete.
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
