Table of Contents
Advertisement
Figure 74. Tensioner ramp/idler pulley
8. Mount the cartridge elevator extension:
Figure 75. Cartridge elevator extension alignment
a. Insert alignment pins of the extension to the slot at the bottom of the
primary chassis as shown in Figure 75.
b. Align the tie bar pins of the two narrow tie bars to the holes in the
extension and primary chassis and attach with the four mounting screws
(two each) as shown in Figure 76 on page 80.
Get other manuals https://www.bkmanuals.com
Appendix B. Adding a library module
79
Advertisement
Table of Contents
