Figure 63. Removing the OCP filler
Next steps
1.
Install the OCP
card.
Removing an OCP card
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the air
shroud.
4.
Remove the support
bracket.
5.
Remove the expansion card riser 1
6.
Remove the expansion card riser 2
Steps
1. Lift the OCP card retention latch.
2. Disengage the OCP card and remove it from the sled.
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
89