Dell PowerEdge C6615 Installation And Service Manual page 8

Table 1. Rear view of the system (air cooling configuration)
Item Ports, panels, or slots
1 Express Service Tag
2 PCIe expansion card riser 1 (R1A)
3 PCIe expansion card riser 2 (R2C)
4 OCP 3.0
5 Lock release for sled handle
6 UID LED
7 iDRAC Direct port (Micro AB-
USB)
8 Sled power button
9 Mini-DisplayPort
10 iDRAC or NIC or RJ45 port
11 USB 3.0 port
8 PowerEdge C6615 system configurations and features
Icon
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Description
The Express Service Tag is
a slide-out label panel that
contains system information such
as Service Tag, NIC, MAC address,
and so on. If you have opted
for the secure default access to
iDRAC, the Information tag will
also contain the iDRAC secure
default password.
The expansion card riser enables
you to connect PCI Express
expansion cards.
The expansion card riser enables
you to connect PCI Express
expansion cards.
The OCP NIC card supports
OCP 3.0. The NIC ports are
integrated on the OCP card which
is connected to the system board.
Enables you to release and then
pivot the handle to remove the
sled from the enclosure.
When pressed, the system ID LED
in the back panel blinks until either
the front or rear button is pressed
again. Press the button to toggle
between on or off mode.
The iDRAC Direct (Micro-AB
USB) port enables you to access
the iDRAC direct Micro-AB USB
features. For more information,
see the Integrated Dell Remote
Access Controller User's Guide at
www.dell.com/poweredgemanuals.
Enables you to power on the sled
while accessing it from the rear.
Enables you to connect a display
device to the system.
The NIC ports that are integrated
on the LOM card provide network
connectivity which is connected to
the system board.
or
Enables you to remotely access
iDRAC. For more information,
see the Integrated Dell Remote
Access Controller User's Guide at
www.dell.com/poweredgemanuals.
The USB ports are 9-pin, 3.0-
compliant. These ports enable you
to connect USB devices to the
system.