Dell PowerEdge C6615 Installation And Service Manual page 38

Table 39. System Profile Settings details (continued)
Option
Workload Profile
PCI ASPM L1 Link Power
Management
Determinism Slider
Power Profile Select
PCIE Speed PMM Control
EQ Bypass To Highest Rate
DF PState Frequency
Optimizer
DF PState Latency
Optimizer
DF CState
Host System Management
Port(HSMP)Support
Boost FMax
Algorithm Performance
Boost Disable (ApbDis)
System Security
To view the System Security screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >
System Security.
Table 40. System Security details
Option
CPU AES-NI
System Password
Setup Password
Password Status
38 Pre-operating system management applications
Description
Allows optimization of performance based on the workload type. The Workload Profile
setting is not a state.Setting a Workload Profile is a one-time action that in turns modifies
various BIOS settings to be optimized for the requested workload type. This option is set to
Not Configured by default.
NOTE: If there is a change in the hardware configuration, it is expected that the
Workload Profile has to be reconfigured. Ensure that the new hardware has been
installed correctly, and load the default BIOS settings before enabling the Workload
Profile.
Enables or disables the PCI ASPM L1 Link Power Management. This option is set to Enabled
by default.
Set the system determinism by Power Determinism or Performance Determinism. This
option is set to Perfomance Determinism by default.
High performance Mode(default): Favors core performance. All DF P-States are available
in this mode and the default DF P-State and DLWM algorithms are active. Efficiency Mode:
Configures the system for power efficiency. Limits boost frequency available to cores and
restricts DF P-States available in the system. Maximum IO Performance Mode: Sets up
Date Fabric to maximize IO sub-system performance.
Reduce link speed when devices are idle. This option is set to Auto by default.
Controls the ability to advertise Equalization Bypass to Highest Rate Support in TSxs sent
prior to LinkUp=1r. This option is set to Disabled by default.
Disabled: Disabled the DP P-state CCLK effective frequency optimizer. Enabled: Enables
the DP P-state CCLK effective frequency optimizer. This option is set to Enabled by default.
Disabled: Disables the DP P-state latency optimizer. Enabled: Enables the DF P-state
latency optimizer. This option is set to Enabled by default.
This field enables(0xF)/disables(0x0) DF Cstate. This option is set to Enabled by default.
This value controls Host System Management Port(HSMP) interface to provide OS-level
software with access to system management functions via a set of mail box registers. This
option is set to Enabled by default.
Boost Fmax. This option is set to 0 - Auto by default.
Enables or disables the Algorithm Performance Boost Disable (ApbDis). This option is set to
Disabled by default.
Description
Improves the speed of applications by performing encryption and decryption by using
the Advanced Encryption Standard Instruction Set (AES-NI). This option is set to
Enabled by default.
Sets the system password. This option is set to Enabled by default and is read-only if
the password jumper is not installed in the system.
Sets the setup password. This option is read-only if the password jumper is not installed
in the system.
Locks the system password. This option is set to Unlocked by default.