Table of Contents
Advertisement
Table 35. ISCSI Device1 Settings screen details (continued)
Option
Connection Order
Table 36. UEFI NVMe-oF Settings screen details
Option
NVMe-oF
NVMe-oF Host NQN
NVMe-oF Host Id
Host Security Key Path
NVMe-oF SubSystem Settings
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 37. Integrated Devices details
Option
User Accessible USB Ports
Internal SD Card Port
iDRAC Direct USB Port
Embedded NIC1
Embedded Video Controller
Description
Enables you to control the order for which the ISCSI connections will be
attempted.
Description
Enables or disables the NVMe-oF device. When disabled, a UEFI boot option is created
for the NVMe-oF device automatically. This is set to Disabled by default.
Specifies Host NQN of the NVMe-oF device.
Specifies Host Id of the NVMe-oF device.
Specifies Host Security Key Path of the NVMe-oF device.
Enables you to control the configuration of the NVMe-oF device.
Description
Provides the options All Ports On or All Ports Off. This option is set to All
Ports On by default. The USB keyboard and mouse still function in certain
USB ports during the boot process, depending on the selection. After the boot
process is complete, the USB ports will be enabled or disabled as per the
setting.
Enables or disables the internal SD card port. This option is set to On or Off.
This option is set to On by default.
NOTE:
The Internal SD Card Port on the PCIe riser is controlled by Internal
USB Port.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to
On by default. Enables or disables the integrated RAID controller. When set
to Disabled, the device is not visible to the operating system(OS). Enables or
disables the integrated RAID controller. When set to Disabled, the device is not
visible to the operating system(OS).
Enables or disables the Embedded NIC1 . If set to Disabled (OS), the
NIC may still be available for shared network access by the embedded
management controller. Configure the Embedded NIC1 option by using the
NIC management utilities of the system. This option is set to Enabled by
default.
Enables or disables the use of Embedded Video Controller as the primary
display. When set to Enabled, the Embedded Video Controller will be the
primary display even if add-in graphic cards are installed. When set to
Disabled, an add-in graphics card will be used as the primary display. BIOS
will output displays to both the primary add-in video and the embedded video
during POST and pre-boot environment. The embedded video will then be
disabled right before the operating system boots. This option is set to Enabled
by default.
NOTE:
When there are multiple add-in graphic cards installed in the
system, the first card discovered during PCI enumeration is selected as the
Pre-operating system management applications
35
Advertisement
Table of Contents
