Table of Contents
Advertisement
Technical Reference
User Parameters
Adjusting your machine sometimes requires that you change special settings
called user parameters. For each user parameter, you must change a bit in a
switch.
A switch has eight bits. Each bit has a value of 1 or 0, and each bit is numbered
0 to 7 from the right.
Bit values and Bit numbers
Bit value
Bit number
In the following example we'll change bit 3 of switch 05 in the user parameters.
A
Press the {Function} {6} then enter the access code {2} {2} {2} {2}. Then
press {6} {3} and the {Yes} key.
You'll get the display.
SETTING?
PRINT LIST h
7
Note
You can press the W key to see a list. Otherwise, press the {Yes} key.
B
Press the {Yes} key again and use W and V to change switches.
Note
For example go to switch 05 by pressing V five times.
SWITCH 05 :1000 0001
C
To change bit 3, press {3} on the ten key pad.
Bit 3 will change from 1 to 0 or from 0 to 1.
SWITCH 05 :1000 1001
Note
To change bit 0, press {0} to change bit 1, press {1} and so on.
D
Press the {Yes} and {Function} keys.
120
0
1
0
↓
↓
↓
7
6
5
Y/h
KPAD/Y/hi
KPAD/Y/hi
0
0
0
↓
↓
↓
4
3
2
0
0
↓
↓
1
0
Advertisement
Table of Contents
