Table of Contents
Advertisement
Energy Saving Modes
Energy Saving mode enables you to avoid using unnecessary power and econo-
mize on electricity. Although we recommend you use this mode from the view-
point of environmental consciousness, you can also turn it off.
When you install this machines for the first time, Energy Saving mode is turned
on by default.
Two types of Energy Saving mode are available:
• Fax Standby: Use when you receive faxes regularly.
• Energy Saving Standby: Use when you wish to economize on power con-
sumption.
Choose the one that best suits your circumstances.
Even though the operation panel display goes out in Energy Saving mode, Indi-
cators that flash or light during communication or reception still work. When the
Receive File indicator lights, exit Energy Saving mode and take the appropriate
action.
Energy Sav-
Status
ing Mode
Type
Fax Standby
Display turns off
The machine maintains the heating
roller temperature at half the full
temperature; warm up takes less
time. (Heater half cool)
Energy Sav-
Display turns off
ing Standby
The machine lets the heating roller
cool to room temperature; warm-
up takes longer.(Heater off)
You can turn Energy Saving mode on or off with User Parameter Function 63.
When the machine is shipped, Energy Saving Standby is selected on.
The machine enters Energy Saving mode when:
• Nobody uses the machine for about 5 minutes (the machine automatically en-
ters Energy Saving mode)
• The user holds down the Energy Saver key for about 2 seconds.
How long before
you can print after
exiting Energy
Saving mode
Within about 30s
Within about 40s
Power con-
sumption
25W
2W
iii
Advertisement
Table of Contents
