Kyocera ECOSYS MA4000cifx Operation Manual page 75

Installing and Setting up the Machine > Touch Panel
3 Cancel the job.
4 Displays the data information.
5 Displays the current number of pages and overall number of pages.
6 Start the sending.
NOTE
• To change the quality or the layout, select [Cancel].
Change the settings and select [Preview] again to see a preview image with the new settings.
• Depending on the function you are using, even if you scan a multi-page original document, only the
first page can be previewed.
2 If there is no problem with the preview image, select [Send].
Sending starts.
Using the Preview Screen
When the Preview screen is displayed, you can do the following by moving the finger that is touching the touch
panel.
Swipe
If a document with multiple pages is placed on the Document Processor, then all of the document is read and
then the preview for the first page is displayed. Swipe the preview to the left and right to display a preview of
the pages in the order read.
Drag
With the finger touching the touch panel, slide the finger to move the position of the displayed preview.
Pinch in/Pinch out
With two fingers touching the touch panel, widen or tighten the space between the two fingers to zoom in
and out on the view.
65