Kyocera ECOSYS MA4000cifx Operation Manual page 183

Preparation before Use > Registering Destinations in the Address Book
Registering an Address (Folder (FTP) Address)
The registering method of an folder (FTP) address to Address Book is as follows.
1
Display the screen.
[System Menu / Counter] key > [FunctionSettings] > [Address Book] > [Add/Edit Machine Address Book] >
[Add] > [Contact]
2
Add the name.
1
Enter the destination name to be displayed on the Address Book.
NOTE
For details on entering characters, refer to the following:
➡
Character Entry Method (page 742)
2 Enter an address number.
To have the number assigned automatically, select [Auto] (0000).
NOTE
• Address Number is an ID for a destination. You can select any available number out of 200 numbers
for contacts and 50 numbers for groups.
• If you specify an address number that is already in use, an error message appears when you select
[Save] and the number cannot be registered. If you set [Auto] (0000) as the address number, the
address is registered under the lowest available number.
3
Add the address.
1 Select .
2
Enter "Host Name", "Port", "Folder Path", "Login User Name" and "Login Password".
The table below explains the items to be entered.
"Host Name"
Host name or IP address of FTP server
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10])
"Port"
Port number
If the port number is not specified, the default port number is 21.
"Folder Path"
Path for the file to be stored.
For example: User\ScanData
If no path is entered, the file is stored in the home directory.
When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the
slash "/" not using the back-slash.
173