Kyocera ECOSYS MA4000cifx Operation Manual page 519

System Menu > Adjustment/Maintenance
[Sharpness Adjustment]
Adjusts the sharpness of image outlines.
Item
[Copy]
[Send/Box]
[Contrast]
Make the overall contrast higher or lower.
Item
[Copy]
[Send/Box]
[Toner SaveLevel (EcoPrint)]
Item
[Copy]
[Printer]
[Auto Color Correction]
This setting allows you to adjust the detection level used by the machine to determine whether the original is color
or black and white in Auto Color Selection Mode. Setting a lower value will result in more originals being identified
as color, while a larger value will tend to increase the number of originals being identified as black and white.
Value: 1 (color), 2,3,4,5 (black and white)
[Correcting Black Line]
Correct fine lines (streaks caused by contamination), which may appear on the image, when the document
processor is used.
Value: [Off], [On]
[Color Registration - Auto]
When first installing the machine or moving it to a new location, color drift during printing may occur. Use this
function to correct the color position of each of cyan, magenta and yellow to resolve color drift.
Sharpen or blur overall image outlines during copying. Adjustment can
be made in 7 levels.
Value: -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Sharpen or blur overall image outlines when sending or storing them in
the Document Box. Adjustment can be made in 7 levels.
Value: -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Increases or decreases the overall contrast of copies.
Value: -3 (Lower), -2, -1, 0 (normal), +1, +2, +3 (Higher)
Increases or decreases the overall contrast when documents are sent or
saved in a document box.
Value: -3 (Lower), -2, -1, 0 (normal), +1, +2, +3 (Higher)
Select the default Toner Save Level (EcoPrint).
Value: 1 to 5
Raising the level reduces toner consumption, but image quality falls.
Select the default Toner Save Level (EcoPrint).
Value: 1 to 5
Raising the level reduces toner consumption, but image quality falls.
509
Description
Description
Description