Kyocera ECOSYS MA4000cifx Operation Manual page 627

Troubleshooting > Troubleshooting
Are the host name, folder path, login user name, and login password of the destination computer
correct?
1
[Home] key > [Send]
2
In the destination screen for sending, select [Enter destination] > [SMB]
3
Enter the destination information
To directly specify the SMB folder, select [Folder Path Entry] and enter each item.
NOTE
When selecting On for "Entry Check for New Dest.", the re-entering screen for the destination information
appears.
➡
Re-entering the New Destination (page 269)
The table below explains the items to be entered.
Setting
Host Name
Port
Folder Path
Login User Name
Login Password
Computer name.
Enter "Host Name" or "IP Address". To enter the IPv6 address, enclose
the address in brackets [ ].
Limited character count: 256 characters or less
Example: [2001:db8:a0b:12f0::10] (Example: [2001:db8:a0b:12f0::10])
Port number
If the port number is not specified, the default port number is 445.
Share name
Limited character count: 260 characters or less
For example: scannerdata
If saving in a folder in the shared folder:
share name\folder name in shared folder
• If the computer name and domain name are the same
User Name
For example: james.smith.
• If the computer name and domain name are different
Domain name\User name
For example: abcdnet\james.smith
Limited character count: 64 characters or less
When transmitting using the optional network interface (IB-37, IB-38 or
IB-51), only alphanumeric characters are allowed. Also, if the computer
name and domain name are different because "\" is not available, use @
to enter the user name in the following format:
User name@Domain name
(Example: james.smith@abcdnet)
Logon password.
Limited character count: 128 characters or less
Upper case and lower case letters are distinguished (case sensitive).
617
Detail