Kyocera ECOSYS MA4000cifx Operation Manual page 491

System Menu > NetworkSettings
Item
Manual Setting
RA (Stateless)
DHCP
DNS Server Address
Manually specify the IP address, prefix length, and gateway address of
TCP/IP (IPv6).
Value
IP Address (Manual)
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
Prefix Length
0 to 128
Default Gateway
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
• This function is displayed when "IPv6" is set to On.
• To enter "Default Gateway", set "RA (Stateless)" to Off.
Select whether to use RA (Stateless).
Value: Off, On
NOTE
• This function is displayed when "IPv6" is set to On.
• Selecting On displays IP address in [IP Address (Stateless)] after
restarting the network.
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
• This function is displayed when "IPv6" is set to On.
• Selecting ON displays IP address in IP Address (Stateful) after
restarting the network.
Set the IP address of DNS (Domain Name System) server.
Value: [Use DNS Server from DHCP], [Use the following DNS Server]
NOTE
When [Use the following DNS Server] is selected, enter the DNS server IP
address into "DNS Server (Primary)" and "DNS Server (Secondary)".
481
Description