Troubleshooting > Troubleshooting
4
Enter the appropriate value.
1
Find the location on each chart where 2 lines most closely match. If this is the 0 position, registration for
that color is not required. For the illustration, B is the appropriate value.
From charts H-1 to H-5, read the values from H-1 to H-5.
From charts V-1 to V-5, read only the values from V-3 (center).
2
Select [Registration].
3
Select the chart to be corrected.
4
Select the values read from the chart.
5
Repeat steps 3 and 4 to enter the registration values for each chart.
6
Select [Start] after all values have been entered. Color registration begins.
7
Select [OK] after color registration is complete.
643