Kyocera ECOSYS MA4000cifx Operation Manual page 487

System Menu > NetworkSettings
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in IP Address.
• After changing the setting, restart the network or turn the machine OFF and then ON.
[IPv6 Settings]
Set up TCP/IP (IPv6) to connect to the network. This setting is available when TCP/IP is On.
Item
IPv6
Manual Setting
RA (Stateless)
Select whether to use IPv6.
Value: Off, On
NOTE
Selecting ON displays IP address in "IPAddr.(LinkLocal)" after restarting
the network.
Manually specify the IP address, prefix length, and gateway address of
TCP/IP (IPv6).
Value
IP Address (Manual)
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
Prefix Length
0 to 128
Default Gateway
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
• This function is displayed when "IPv6" is set to On.
• To enter "Default Gateway", set "RA (Stateless)" to Off.
Select whether to use RA (Stateless).
Value: Off, On
NOTE
• This function is displayed when "IPv6" is set to On.
• Selecting On displays IP address in [IP Address (Stateless)] after
restarting the network.
477
Description