Installing The Lower Triple Clamp - KTM 250 SX-F 2021 Owner's Manual

11.14

Installing the lower triple clamp

Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check that the O-ring at the top
–
Slide on protective ring
S02307-10
(SX‑F EU/US, XC-F US)
–
Position the upper triple clamp with the handlebar.
–
Mount screw
F01562-10
–
Position the fork legs.
Air bleeder screw
to the front.
Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the upper edge of the upper
H01182-11
triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
SERVICE WORK ON THE CHASSIS 11
p. 150)
1
is correctly positioned.
2 3
and O-ring
4
, but do not tighten yet.
5
of the right fork leg is positioned
A
of the left fork leg faces the front.
.
57