Lubricating The Steering Head Bearing; Removing The Start Number Plate; Installing The Start Number Plate; Removing Front Fender - KTM 250 SX-F 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.17
11.18
11.19
11.20
62

Lubricating the steering head bearing

H02387-01

Removing the start number plate

F01524-10

Installing the start number plate

F01525-10

Removing front fender

–
Remove the motorcycle from the lift stand. (
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in
the course of removal and installation of the lower triple
clamp.
–
1
Remove screw .
–
Unhook the start number plate from the brake line and remove
it.
–
Position the brake line in holders
plate.
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
Preparatory work
–
Remove the start number plate. (
p. 50)
( p. 56)
( p. 57)
A
on the start number
1
.
p. 62)