Removing The Lower Triple Clamp - KTM 250 SX-F 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.13
56

Removing the lower triple clamp

F01561-10
F01833-10
F01560-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs. (
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
(SX‑F EU/US, XC-F US)
–
1
Open cable holder
harness.
–
2
Remove screw .
–
3
Remove screw .
–
Take off the upper triple clamp with the handlebar and set
aside.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
(TROY LEE DESIGNS)
–
1
Open cable holder
harness.
–
2
Remove screw .
–
3
Remove screw .
–
Take off the upper triple clamp with the handlebar and
place to one side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
4
Remove O-ring .
–
5
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
p. 50)
( p. 100)
p. 54)
p. 62)
p. 62)
on the left and detach the wiring
on the left and detach the wiring
.