Adjusting The Compression Damping Of The Fork - KTM 250 SX-F 2021 Owner's Manual

10 TUNING THE CHASSIS
10.14
46

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
F02212-10
Guideline
Air pressure (All EU models)
Air pressure (SX‑F US)
Air pressure (XC‑F US)
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster clockwise all the way.
Info
1
Adjuster is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
10.4 bar (151 psi)
10.5 bar (152 psi)
9.8 bar (142 psi)
0.2 bar (3 psi)
7 bar (102 psi)
12 bar (174 psi)
p. 50)