KTM 250 SX-F 2021 Owner's Manual page 79

(all SX‑F models)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
K01034-11
–
Plug in connector
–
Remove the wash cap set. Clean the quick release coupling
thoroughly with compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
valve!
–
F01591-11 Spray silicone spray onto a lint-free cleaning cloth and
lightly lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
(XC‑F US)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
F01565-11
–
Plug in connector
–
Remove the wash cap set. Clean the quick release coupling
thoroughly with compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
valve!
–
F01594-11 Spray silicone spray onto a lint-free cleaning cloth and
lightly lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
SERVICE WORK ON THE CHASSIS 11
2
with the rubber bushing.
M6
3
for the fuel pump.
p. 151)
4
.
2
with the rubber bushing.
M6
3
for the fuel pump.
p. 151)
4
.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
77