Running In The Engine; Starting Power Of Lithium-Ion Batteries At Low Temperatures - KTM 250 SX-F 2021 Owner's Manual

–
Adjust the basic position of the foot brake lever.
–
Adjust the basic position of the shift lever.
–
Get used to the handling characteristic of the motorcycle on suitable terrain before undertaking a more chal-
lenging ride.
Info
This vehicle is not approved for use on public roads.
When off road, it is recommended that you are accompanied by another person on another vehicle so
that you can help each other.
–
Also, ride as slowly as possible and in a standing position to get a better feel for the motorcycle.
–
Do not undertake any off-road trips that exceed your ability and experience.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
(all SX‑F models)
–
Do not carry the luggage.
(XC‑F US)
–
If luggage is carried, ensure it is fixed firmly as close as possible to the center of the vehicle and ensure
even weight distribution between the front and rear wheels.
Info
Motorcycles react sensitively to any changes of weight distribution.
–
Do not exceed the maximum permissible weight and maximum permissible axle loads.
Guideline
Maximum permissible overall weight
Maximum permissible front axle load
Maximum permissible rear axle load
–
Run in the engine. ( p. 23)
7.2

Running in the engine

–
During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
During the first operating hour
Maximum engine performance
During the first 3 operating hours
–
Avoid fully opening the throttle!
7.3

Starting power of lithium-ion batteries at low temperatures

( p. 94)
( p. 121)
335 kg (739 lb.)
145 kg (320 lb.)
190 kg (419 lb.)
7,000 rpm
≤ 75 %
Lithium-ion batteries are far lighter than lead batteries, have a low
self-discharge rate, and have more starting power at temperatures
over 15 °C (60 °F). At low temperatures, however, the starting
power of lithium-ion batteries drops to below that of lead batter-
ies.
Multiple starting attempts may be needed. Press the start button
for 5 seconds, and wait 30 seconds between attempts. The pauses
are necessary so that the heat created can distribute through the
lithium-ion battery and the 12-V battery is not damaged.
402555-01
PREPARING FOR USE 7
23