Installing The Shock Absorber - KTM 250 SX-F 2021 Owner's Manual

11.23

Installing the shock absorber

–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
F01584-10
Main work
–
Carefully position the shock absorber into the vehicle from the
bottom.
–
Mount and tighten screw
Guideline
Screw, top
shock absorber
F01585-10
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, fork pivot
F01586-10
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
S01222-11
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws,
F01587-10
chassis
SERVICE WORK ON THE CHASSIS 11
1
.
M10 60 Nm (44.3 lbf ft)
A
.
2
.
M16x1.5 100 Nm
(73.8 lbf ft)
3
4
engages in the foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
7
.
Loctite ® 2701™
.
65