11.12
Installing the fork legs
Main work
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
H01182-10
be flush with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
(SX‑F EU/US, XC-F US)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom
F01559-11
triple clamp
(TROY LEE DESIGNS)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom
F01832-11
triple clamp
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
K01014-11
Finishing work
–
Install the front wheel.
SERVICE WORK ON THE CHASSIS 11
1
of the right fork leg is positioned to
of the left fork leg faces the front.
2
.
M8
3
.
M8
2
.
M8
3
.
M8
M8
25 Nm (18.4 lbf ft)
(
p. 101)
17 Nm
(12.5 lbf ft)
12 Nm (8.9 lbf ft)
17 Nm
(12.5 lbf ft)
12 Nm (8.9 lbf ft)
4
.
Loctite
®
243™
55