Checking The Tire Condition - KTM 250 SX-F 2021 Owner's Manual

13 WHEELS, TIRES
13.5
104
V00298-10

Checking the tire condition

Info
Only mount tires approved and/or recommended by KTM.
Other tires could have a negative effect on handling characteristics.
The type, condition, and pressure of the tires all have a major impact on the handling characteristic of the
motorcycle.
The tires mounted on the front and rear wheels must have a similar profile.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
400602-10
–
3
Position chain adjuster
it yet.
–
Make sure that chain adjusters
5
adjusting screws .
–
Check the chain tension. (
–
4
Tighten nut .
Guideline
Nut, rear wheel spin-
dle
Info
The wide adjustment range of the chain adjusters
(32 mm (1.26 in)) enables different secondary ratios
with the same chain length.
3
Chain adjusters
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Check the front and rear tires for cuts, embedded objects, and
other damage.
» If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
4
. Mount nut , but do not tighten
3
are fitted correctly on
p. 79)
M25x1.5 80 Nm (59 lbf ft)
can be turned by 180°.
p. 50)
p. 50)