Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.5
11.6
11.7
52
Removing the handlebar cushion (TROY LEE DESIGNS)
A00899-10
Installing the handlebar cushion (TROY LEE DESIGNS)
A00899-10
Removing the fork protector
S01208-10
Universal oil spray (
p. 151)
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
1
Remove screws
and take off the handlebar cushion.
–
Position the handlebar cushion. Mount screws
Guideline
Remaining screws,
chassis
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the left fork protector.
–
3
Remove screws
and take off the right fork protector.
p. 53)
p. 50)
1
.
M5
5 Nm (3.7 lbf ft)
Advertisement
Table of Contents
