Fine Mesh Steel Filter Screen Assembly - Vulcan-Hart QUICKFRY VHG-A Series Installation & Operation Manual

VHG SERIES GAS FRYERS
•
Slide the filter pan back into the drawer slides. Position the filter screen assembly into the
suction tube clip in the filter pan positioning the filter screen assembly flat on the bottom of
the filter pan.
•
Carefully line up the suction tube so that it mates with the oil receptacle block mounted on the
frame of the fryer battery. Close the filter pan drawer. See Figures 1 and 2.
SUCTION TUBE
CLIP
FILTER SCREEN LAYS FLAT ON
BOTTOM OF THE FILTER PAN

Fine Mesh Steel Filter Screen Assembly

FILTER SCREEN
VULCAN
SUCTION TUBE
Fig.1
-17-
OIL RECEPTACLE BLOCK
Fig.2
SUCTION TUBE
FILTER SCREEN INSERT
1. Slide the filter screen insert
into the filter screen and align
the center holes. Close the end
latch to secure into place.
F-47679 Rev. A (3-20)