Dual-Function Reset Button - NETGEAR M4350 Series Hardware Installation Manual

• Direct attach cables:
- AXC761: SFP+ 1 m (about 3.3 ft) direct attach cable
-
AXC763: SFP+ 3 m (about 10 ft) direct attach cable
For more information about NETGEAR SFP and SFP+ transceiver modules and cables,
visit netgear.com/business/wired/switches/accessories. If purchased, transceiver modules
and cables are shipped separately from the switch.
The following table shows the models and the ports that can support fiber transceiver
modules. SFP+ and SFP28 ports are backward compatible with SFP modules.
Table 8. SFP+ and SFP28 ports
Model Number
M4350-8X8F
M4350-12X12F
M4350-24G4XF
M4350-48G4XF
M4350-24X4V
M4350-24F4V
M4350-44M4X4V

Dual-function Reset button

The switch provides a recessed, dual-function Reset button on the front panel.
Depending on how long you press the button (for details, see the following procedure),
this button lets you perform the following tasks:
• Restart (power-cycle) the switch: The switch restarts. All saved settings are retained.
We recommend that you save the settings before you press the Reset button to
restart the switch.
• Reset the switch to factory default settings: All settings are erased and the switch
restarts with factory default settings.
Hardware Overview
Fully Managed Switches M4350 Series
Type of Port Port Numbers
SFP+ 9 through 16
SFP+ 13 through 24
SFP+ 25 through 28
SFP+ 49 through 52
SFP28 25 through 28
SFP+ 1 through 24
SFP28 25 through 28
SFP28 49 through 52
38 Hardware Installation Guide