Model M4350-48G4Xf (Sku Gsm4352); Front Panel Model M4350-48G4Xf - NETGEAR M4350 Series Hardware Installation Manual

Table 3. LEDs of model M4350-24G4XF (Continued)
LED
Port LEDs for SFP+ ports
numbered 25 through 28
Port LEDs, Back Panel
OOB Ethernet port LEDs

Model M4350-48G4XF (SKU GSM4352)

This section describes the switch hardware features for model M4350-48G4XF (SKU
GSM4328).
This full-width model provides a switching fabric of 176 Gbps and supports the following
port configurations:
• Forty-eight PoE+ (802.3at) Gigabit Ethernet RJ-45 ports that support 1 Gbps and
100 Mbps
• Four SFP+ fiber uplink ports that support 10 Gbps or 1 Gbps transceiver modules
The total PoE budget for this model is 236W, optionally expandable to up to 1440W.

Front panel model M4350-48G4XF

Figure 7. Front panel model M4350-48G4XF
Hardware Overview
Fully Managed Switches M4350 Series
Description
Off: No SFP module link is established on the fiber port.
Solid green: The fiber port established a 10G link.
Blinking green: The fiber port is transmitting or receiving packets at 10G.
Solid yellow: The fiber port established a 1G link.
Blinking yellow: The fiber port is transmitting or receiving packets at 1G.
Left LED, speed status:
Solid green: The port established a 1G link.
Solid yellow: The port established a 100M link.
Off: No link is established on the port.
Right LED, activity and link status:
Solid green: The port established a link.
Blinking green: The port is transmitting or receiving packets.
Off: No link is established on the port.
22 Hardware Installation Guide