Cables And Speed; Dual-Function Reset Button - NETGEAR M4250-10G2XF-PoE++ Hardware Installation Manual

• Gigabit transceiver modules:
- AGM734: SFP transceiver 1000BASE-T, SFP copper RJ-45 GBIC
- AXM765: SFP+ transceiver 10GBASE-T, SFP+ copper RJ-45 GBIC
• Direct attach cables:
-
AXC761: SFP+ 1 m (about 3.3 ft) direct attach cable
- AXC763: SFP+ 3 m (about 10 ft) direct attach cable
- AXC765: SFP+ 5 m (about 16.4 ft) direct attach cable
- AXC767: SFP+ 7 m (about 23 ft) direct attach cable
- AXC7610: SFP+ 10 m (about 33 ft) direct attach cable
-
AXC7615: SFP+ 15 m (about 49.2 ft) direct attach cable
- AXC7620: SFP+ 20 m (about 65.6 ft) direct attach cable
For more information about NETGEAR SFP and SFP+ transceiver modules and cables,
visit netgear.com/business/wired/switches/accessories. If purchased, transceiver modules
and cables are shipped separately form the switch.

Cables and speed

The following table describes the network cables that you can use for the switch
connections and the speeds that these cables can support, up to 100 meters (328 feet).
Table 8. Cables and speeds
Speed Cable Type
100 Mbps Category 5 (Cat 5) or higher rated
Note: In most business networks, Cat 5e cables superseded Cat 5 cables.
1 Gbps or 2.5 Gbps Category 5e (Cat 5e) or higher rated

Dual-function Reset button

The switch provides a recessed, dual-function Reset button on the back panel.
Depending on how long you press the button (for details, see the following procedure),
this button lets you perform the following tasks:
• Restart (power-cycle) the switch: The switch restarts. All saved settings are retained.
We recommend that you save the settings before you press the Reset button to
restart the switch.
Hardware Overview
AV Line of Fully Managed Switches M4250 Series
36 Hardware Installation Guide