From left to right, the front panel of model M4350-24F4V provides the following common
components, which are clearly named or numbered on the front panel:
• POWER, FAN, STACK MASTER, and STACK ID: System LEDs (see LEDs model
M4350-24F4V on page 31)
• RESET: Recessed dual-function Reset button (see Dual-function Reset button on
page 38)
• USB C: One USB Type-C console port (see USB Type-C console port on page 39)
• 24 SFP+ ports, numbered 1 through 24: Twenty-four 10G/1G SFP+ ports, each
with a combined speed and activity LED (see LEDs model M4350-24F4V on page
31)
• 4 SFP28 ports, numbered 25 through 28: Four 25G/10G/1G SFP28 fiber uplink
ports, each with a combined speed and activity LED (see LEDs model M4350-24F4V
on page 31)
For information about optional devices for the fiber uplink ports, see Fiber transceiver
modules and cables for SFP+ and SFP28 ports on page 37.
Back panel model M4350-24F4V
Figure 12. Back panel model M4350-24F4V
From left to right, the back panel of model M4350-24F4V provides the following common
components, which are clearly named or numbered on the back panel:
• On/Off power switch: One On/Off power switch that lets you turn on or turn off
power to the switch
• OOB: One out-of-band (OOB) 1G Ethernet port (see Out-of-band 1G Ethernet port
on page 39) with a left LED that indicates the speed and a right LED that indicates
the activity (see LEDs model M4350-24F4V on page 31)
• USB: Two USB 3.0 ports (see USB 3.0 ports on page 39)
• Fans: Four fans placed in two groups: one group of three fans (FAN 1+ FAN 2, and
FAN 3) and one single fan (FAN 4)
• AC power receptacle: AC receptacle for the internal PSU. The PSU can accept
100–240V ~ 50–60 Hz, 3A.
• PSU bay: One PSU bay (PSU 1) that is closed with a PSU cover. For information about
ordering an optional APS that you can install in the PSU bay, contact NETGEAR.
Hardware Overview
Fully Managed Switches M4350 Series
30
Hardware Installation Guide