Leds Model M4350-12X12F - NETGEAR M4350 Series Hardware Installation Manual

• On/Off power switch: One On/Off power switch that lets you turn on or turn off
power to the switch
• AC power receptacle: AC receptacle for the internal PSU. The PSU can accept
100–240V ~ 50–60 Hz, 3A.

LEDs model M4350-12X12F

This section describes the LED designations of model M4350-12X12F. The LEDs are
clearly named or numbered on the front and back panels.
Table 2. LEDs of model M4350-12X12F
LED
System LEDs, Front Panel
POWER LED
FAN LED
STACK MASTER LED
STACK ID LED
Port LEDs, Front Panel
Port LEDs for multispeed
Ethernet ports numbered 1
through 12
Port LEDs for SFP+ ports
numbered 13 through 24
Hardware Overview
Fully Managed Switches M4350 Series
Description
Solid green: The switch is powered on and operating normally.
Solid yellow: The switch is starting.
Off: Power is not supplied to the switch.
Solid green: The fans are functioning normally.
Solid yellow: One or more fans are malfunctioning.
Solid green: The switch is functioning as the stack management switch.
Off: The switch is functioning as a stack member switch or is not a member of
a stack.
The Stack LED contains segments that can indicate the stack unit number of the
switch:
Solid green indicating a number: The switch is a member of a stack. The LED
displays the stack unit number.
Solid green indicating E: The switch functions in ECO mode with all port LEDs
turned off.
Off: The switch is not a member of a stack.
Left LED, speed, activity, and link status:
Off: No link is established on the port.
Solid green: The port established a 10G link.
Blinking green: The port is transmitting or receiving packets at 10G.
Solid yellow: The port established a 5G, 2.5G, 1G, or 100M link.
Blinking yellow: The port is transmitting or receiving packets at 5G, 2.5G, 1G,
or 100M.
Off: No SFP module link is established on the fiber port.
Solid green: The fiber port established a 10G link.
Blinking green: The fiber port is transmitting or receiving packets at 10G.
Solid yellow: The fiber port established a 1G link.
Blinking yellow: The fiber port is transmitting or receiving packets at 1G.
18 Hardware Installation Guide