Model M4350-24G4Xf (Sku Gsm4328); Front Panel Model M4350-24G4Xf - NETGEAR M4350 Series Hardware Installation Manual

Table 2. LEDs of model M4350-12X12F (Continued)
LED
Port LEDs, Back Panel
OOB Ethernet port LEDs

Model M4350-24G4XF (SKU GSM4328)

This section describes the switch hardware features for model M4350-24G4XF (SKU
GSM4328).
This full-width model provides a switching fabric of 128 Gbps and supports the following
port configurations:
• Twenty-four PoE+ (802.3at) Gigabit Ethernet RJ-45 ports that support 1 Gbps and
100 Mbps
• Four SFP+ fiber uplink ports that support 10 Gbps or 1 Gbps transceiver modules
The total PoE budget for this model is 648W, optionally expandable to 720W.

Front panel model M4350-24G4XF

Figure 5. Front panel model M4350-24G4XF
From left to right, the front panel of model M4350-24G4XF provides the following
common components, which are clearly named or numbered on the front panel:
• POWER, FAN, PoE MAX, STACK MASTER, and STACK ID: System LEDs (see LEDs
model M4350-24G4XF on page 21).
• RESET: Recessed dual-function Reset button (see Dual-function Reset button on
page 38).
Hardware Overview
Fully Managed Switches M4350 Series
Description
Left LED, speed status:
Solid green: The port established a 1G link.
Solid yellow: The port established a 100 M link.
Off: No link is established on the port.
Right LED, activity and link status:
Solid green: The port established a link.
Blinking green: The port is transmitting or receiving packets.
Off: No link is established on the port.
19 Hardware Installation Guide