Sfp Ports For Fiber Or Copper Connectivity; Single-Function Reset Button - NETGEAR GS724TPv3 Hardware Installation Manual

24-Port Gigabit Ethernet (Hi-Power) PoE+ Smart Switch with 2 SFP Ports
To simplify the procedure for attaching devices, all RJ-45 ports support Auto Uplink
technology. This technology allows attaching devices to the RJ-45 ports with either
straight-through or crossover cables.
When you insert a cable into the switch's RJ-45 port, the switch automatically performs
the following actions:
• Senses whether the cable is a straight-through or crossover cable.
• Determines whether the link to the attached device requires a normal connection
(such as when you are connecting the port to a computer) or an uplink connection
(such as when you are connecting the port to a router, switch, or hub).
• Automatically configures the RJ-45 port to enable communications with the attached
device. The Auto Uplink technology compensates for setting uplink connections
while eliminating concern about whether to use crossover or straight-through cables
when you attach devices.
All copper ports also support Power over Ethernet (PoE+).

SFP ports for fiber or copper connectivity

To enable fiber or additional copper connections on the switch, SFP ports accommodate
standard small form-factor pluggable (SFP) gigabit interface converters (GBICs, also
referred to as transceiver modules) for 1G fiber or copper connectivity. GBICs are sold
separately from the switch.
The switch supports the following NETGEAR SFP transceiver modules:
• AGM731F SFP transceiver 1000BASE-SX, SFP short-reach multimode LC GBIC
• AGM732F SFP transceiver 1000BASE-LX, SFP long-reach multimode LC GBIC
• AGM734 SFP transceiver 1000BASE-T, SFP copper RJ-45 GBIC
For more information about NETGEAR SFP transceiver modules and cables, visit
netgear.com/business/products/switches/modules-accessories.

Single-function Reset button

The switch provides a single-function Reset button on the front panel so that you can
restart the switch. We recommend that you save the configuration before you press the
Reset button.
To restart the switch:
1. Insert a device such as a straightened paper clip into the opening.
2. Press the recessed Reset button for more than one second.
During the restart process, the Power LED lights yellow.
Hardware Overview 18 Hardware Installation Guide