Table of Contents
Advertisement
Basics
Envelopes
Note
1
When copying on envelopes, use the bypass tray and specify the size. See
P.43 "When Copying onto Envelopes"
Specification of envelopes are as follows:
Weight
Recommended weight and
size
You can load up to 10 envelopes (72 - 90 g/m
at a time, without forcibly preassign them. However, make sure that the en-
velopes are not damp, and that the top of the stack is not higher than the limit
mark on the side guide
Load the envelopes with the flaps aligned to the right side fence. The flaps
should be securely folded down.
Make sure that there is no air in the envelopes before setting.
To get the better copy quality, it is recommended that you set the right, left,
top, and bottom margin, to at least 15 mm (0.6") each.
Do not copy on both sides of envelopes.
Load only one size and type of envelope at a time.
Before loading envelopes, flatten the leading edges (side being fed into the
printer) of them by running a pencil or ruler across them.
20
Metric version
2
72 – 90 g/m
72 g/m2, 114 162 mm (C6
Env)
P.43 "When Copying onto Envelopes"
Inch version
19 – 24 lb
7
24 lb, 3
/
"
7
8
arch)
2
, 19 - 24 lb) onto the bypass tray
1
/
" (Mon-
2
Advertisement
Table of Contents
