Table of Contents
Advertisement
Remarks
Where to Put Your Machine
Machine Environment
Your machine's location should be carefully chosen because environmental con-
ditions greatly affect its performance.
Optimum environmental conditions
R CAUTION:
• Keep the machine away from humidity and dust. A fire or an elec-
• Do not place the machine on an unstable or tilted surface. If it top-
5
R CAUTION:
• If you use the machine in a confined space, make sure there is a
• Temperature: 10 – 32 C (50 – 89.6 F)(humidity to be 54% at 32 C, 89.6 F)
• Humidity: 15 – 80% (temperature to be 27 C, 80.6 F at 80%)
• A strong and level base.
• The machine must be level within 5mm, 0.2" both front to rear and left to
right.
• To avoid possible build-up of ozone, make sure to locate this machine in a
large well ventilated room that has an air turnover of more than 30 m
person.
Environments to avoid
• Locations exposed to direct sunlight or strong light (more than 1,500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air
from a heater. (Sudden temperature changes might cause condensation with-
in the machine.)
• Places where the machine might be subjected to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.
86
tric shock might occur.
ples over, it could cause injury.
continuous air turnover.
3
/hr/
Advertisement
Table of Contents
