4. Printing on Envelopes
Measuring the Envelope Size
While keeping the flap opened, measure the width (the length across the feeding direction when loaded
on the tray), and the length along the feeding direction.
• Only envelopes that are at least 139.7 mm (5.5 inches) wide can be loaded.
• Misfeeds might occur depending on the length and shape of the flaps.
Square/End-opening Envelopes
1. Across the feed direction
2. Along the feed direction
If you are printing onto side-opening envelopes, be sure to unfold their flaps and set them in the
orientation with print side face up. Flaps must be at the right side of the wide LCT or multi bypass
tray (Tray A).
Side-opening Envelopes
2
2
1. Across the feed direction
1 1
2
2
M0EDIM0511
1 1
M0EDIM0512
41