Table of Contents
Advertisement
Bypass tray
Metric version Inch version
*1
Vertical: 90 –
Custom size
305 mm
Horizontal: 148
– 1,260 mm
Postcards, adhesive labels, trans-
lucent paper, OHP transparen-
cies
*1
Com#10 Env
Custom size
241.3
Envelopes
C6 Env
162
DL Env
220
Monarch Env
190.5
*1
When you set these custom size paper in the bypass tray, you have to specify the size.
See
P.39 "Copying from the Bypass Tray"
Important
If you use damp or curled paper, a misfeed might occur. In such a case, try
turning over the paper stack in the paper tray. If there is no improvement,
change to copy paper with less curl.
Note
Post cards should be fed from the bypass tray.
If OHP transparencies and translucent paper gets double-fed, set pages one
sheet at a time.
If you load paper of the same size and in the same direction in two or more
trays, the machine automatically shifts to another tray when the tray in use
runs out of paper. This function is called Auto Tray Switch. This saves inter-
rupting a copy run to replenish paper even when you make a large number
of copies. You can cancel this setting. See "13. Auto Tray Switch" of the Sys-
tem Settings.
Reference
If you want to add paper, see
If you want to change the paper size, see
Vertical: 3.5" –
12.0" mm
Horizontal:
5.8" – 49.6" mm
104.8 mm, 9.5"
4.2"
114 mm, 6.4"
4.5"
110 mm, 8.7"
4.4"
98.4 mm, 7.5"
3.9"
P.66 " B Loading Paper".
Paper weight
Paper capacity
2
10 sheet
52 – 157 g/m
,
16 – 42 lb
2
72 – 90 g/m
,
19 – 24 lb
P.72 "Changing the Paper Size".
Copy Paper
1
19
Advertisement
Table of Contents
