Table of Contents
Advertisement
Setting Originals
Limitation
Set the original after correction flu-
id and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.
Note
Basically the originals should be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the direction of the
originals. For details, see explana-
tions of each function.
Originals
Set in the
document
feeder
Reference
See
P.14 "Originals".
Setting Originals on the
Exposure Glass
A
Lift the platen cover or the docu-
ment feeder.
B
Set the original face down on the
exposure glass. Slide your origi-
Set on the
nal up to the blue scale, then into
exposure
the left corner of the exposure
glass
glass as shown.
1: Reference mark
2: Scale
C
Lower the platen cover or the doc-
ument feeder.
Note
Be sure to open the platen cover
or the document feeder by more
than 30 , otherwise the original
size might not be detected cor-
rectly.
Setting Originals
2
27
Advertisement
Table of Contents
