Table of Contents
Advertisement
What to do If Something Goes Wrong
Problem
Parts of the image are not
copied.
Copies are blank.
Images are uneven or
blurred.
3
Images are light.
Images are dark.
The reverse side of an orig-
inal is copied.
A moire pattern is pro-
duced on copies.
R
Tones are not reproduced
properly.
64
Cause
An improper paper size is
selected.
The original is not set cor-
rectly.
Copy paper was not stored
properly.
Black and white printed
originals
Original with designed
background.
Colored text originals
Black and white printed
originals
Original with designed
background.
Timetables or maps
Your original has dot pat-
tern image or many lines.
Printed photographs
Standard photographic
prints
Standard photographic
prints
Printed photographs
Action
Select the proper paper
size.
Set originals correctly.
P.27 "Setting Originals".
Set papers on the Bypass
tray, and specify "Special"
for Pap. Type.
P.42
"When copying onto OHP
transparencies or thick paper"
Press the {Darker} key.
P.31 "Adjusting Copy Image
Density"
Press the {Darker} key.
P.31 "Adjusting Copy Image
Density"
Press the {Darker} key.
P.31 "Adjusting Copy Image
Density"
Press the {Lighter} key.
P.31 "Adjusting Copy Image
Density"
Press the {Lighter} key.
P.31 "Adjusting Copy Image
Density"
Specify "Sharp" for Text
mode in "08.Image Adjust-
ment". Then select the Text
mode.
P.79 "08.Image
Adjustment"
Place the original on the ex-
posure glass at a slight an-
gle.
Select the Photo mode.
Select the Text·Photo
mode.
Specify "Glossy Photo" for
Photo mode "08.Image Ad-
justment". Then select the
Photo mode.
P.79
"08.Image Adjustment"
Select the Photo mode and
adjust the image density.
Advertisement
Table of Contents
