Table of Contents
Advertisement
E Enter the horizontal size of the
paper with the { { { { Number} } } } keys,
then press the { { { { #} } } } key.
Note
To change the number en-
tered, press the {Clear/Stop}
key and enter the new
number.
4: Horizontal
5: Vertical
F Enter the vertical size of the
paper with the { { { { Number} } } } keys,
then press the [OK] key.
Note
To change the number en-
tered, press the {Clear/Stop}
key and enter the new
number.
When you specify the paper
size, ! appears on the dis-
Copying from the Bypass Tray
play to indicate bypass tray
copying.
G Press the [Exit] key.
When copying onto standard size
copy paper
Important
If you select Standard or Cus-
tom as the Paper Size setting,
these functions will remain in
effect even after Auto Clear or
pressing the {Clear Modes} key.
You can alter this behavior by
changing "12. Reset Bypass
Set". See
P.80 "1. General Fea-
3
tures
/
"
4
A Make sure the [Bypass] is se-
lected.
B Press the { { { { #} } } } key.
C Press the [Pap. Size] key.
2
41
Advertisement
Table of Contents
