Table of Contents
Advertisement
What to do If Something Goes Wrong
A
Open the side cover.
B
Pull the used toner cartridge out of the machine by holding the grips of it.
C
Take a new toner cartridge from the box.
3
D
Hold the toner cartridge as shown in the illustration, and shake it side to side
about 7-8 times.
Note
If the toner cartridge is not shaken enough, toner might not be evenly dis-
tributed in the cartridge. In this case, the print quality might be reduced.
E
Place the toner cartridge on a flat surface. Pull out the tape inside the unit hor-
izontally while holding the cartridge with one hand as shown in the illustra-
tion.
Note
Be sure to remove the tape completely before installing the new toner car-
tridge. Otherwise, the machine might be damaged.
Be sure to pull the tape horisontally. Pulling it upward or downward caus-
es toner scattering.
Be careful not to make your cloths dirty toner.
After pulling out the tape from the cartridge, toner scatters easily. Do not
shake or give a shock to the cartridge.
68
Advertisement
Table of Contents
