Table of Contents
Advertisement
3. What to do If Something
If Your Machine does not Operate as You
Want
Message
Machine's Condition
The machine instructs you
to wait.
The machine cannot detect
the original size.
The machine instructs you
to check the original direc-
tion.
The machine instructs you
to reset the paper tray cor-
rectry.
The machine instructs you
to check paper size.
Problem/Cause
The machine is warming
up.
Improper original is set.
See
P.15 "Sizes Difficult
to Detect".
Original is not set.
There is no copy paper that
is the same direction as the
originals.
--
Improper original size is
set.
Goes Wrong
Action
Wait for the machine to
warm-up.
Reference
You can use Auto Start
mode during warm-up
period. See
to Start—Entering Copy
Job Settings During the
Warm-up Period"
Select paper manually, not
in Auto Paper Select mode.
Do not use Auto Reduce/
Enlarge mode.
When you set originals in
the document feeder, input
the both horizontal and
vertical sizes of the non-
standard original. See
P.27 "Setting Originals on
the Exposure Glass".
Set your originals.
Set the original in the same
direction as the copy paper.
Reset the paper tray correc-
try.
Select the proper paper
size.
P.50 "Au-
61
Advertisement
Table of Contents
