Copying; Basic Procedure - Ricoh Aficio 180 Copy Reference Manual

Basic Procedure

A
When the machine is set for user
code, enter the user code with the
{ { { { Number} } } } keys and then press the
{ { { { #} } } } key.
Reference
See P.50 "User Codes".
B
Make sure that the machine is in
Copy mode.
Note
If not, press the {Copy} key.
C
Make sure that there are no previ-
ous settings remaining.
Note
To clear settings, press the
{Clear Modes} key.
D
Set your originals.
Reference
See P.27 "Setting Originals".
E
Set your desired settings.

2. Copying

F
Enter the number of copies re-
quired with the { { { { Number} } } } keys.
Note
The maximum copy quantity
can be set between 1 and 99 (de-
fault: 99). See "05. Max. Copy
Q'ty" in P.79 "1. General Fea-
2
tures / ".
4
To change the number entered,
press the {Clear/Stop} key and
enter the new number.
G
Press the { { { { Start} } } } key.
The machine starts copying.
Important
If the number of delivered cop-
ies exceeds the delivery tray ca-
pacity, paper jam might occur.
Remove copies before the stack
gets higher than the copy deliv-
ery exit.
Note
To stop the machine during the
multi-copy run, press the {Clear/
Stop} key.
25