Programming Destination Information From Web Browser - Ricoh Aficio 1027 Facsimile Reference Manual

Fax via Computer
Programming Destination Information
from Web Browser
If the receiving machine is compliant with T.37 full mode Internet Fax, you can
program the receiver's properties from Web Image Monitor. You can program
the following properties:
• Compression type
• Paper size
• Resolution
Note
❒ It is recommended that you use a Web Image Monitor running under the
same network environment as this machine. Otherwise, the Web browser
may not open and an error may occur.
❒ You can also check and manage the documents using DeskTopBinder.
5
❒ For a detailed description, see Help for Web Image Monitor.
❒ When a receiver that is programmed as full mode in the Address Book re-
turns a Reception Notice e-mail, the contents of the newly received e-mail
overwrite the existing information.
Reference
p.30 "T.37 Full Mode"
"System Settings", General Settings Guide
"Monitoring and Configuring the Printer", Network Guide
174