To Edit Machine Properties Already Programmed - Ricoh Aficio 1027 Facsimile Reference Manual

To Edit Machine Properties Already Programmed

Follow these steps to use Web Image Monitor to edit information about the des-
tination machine registered in the Address Book.
A
Start the Web browser.
B
Enter the IPv4 address of the machine you want to monitor after "http://" in
the address field.
The top screen is displayed.
C
Click [Login], and then enter the Administrator's name and password.
D
Click [Address Book] in the left pane.
The Address Book is displayed.
E
Click the radio button to the left of the machine you want to modify, and
then click [Change].
The [Change User] page appears.
F
Set the properties for Internet Fax data format other than the mode selection.
If you change the mode to "Simple Mode", you cannot set machine properties.
G
Click [OK] at the upper-left of the screen.
To cancel the setting, click [Cancel] in the upper-left of the screen.
The Address Book is displayed.
H
Close the Web browser.
Programming Destination Information from Web Browser
5
175