Toyota RAV4 2019 Owner's Manual page 79

 "Notification method"
Select to change each notification
method used to warn the driver when
the system recognizes excess speed,
no overtaking and no-entry sign.
 "Notification Level"
Select to change each notification level
used to warn the driver when the sys-
tem recognizes a speed limit sign.
■
DRCC (RSA) (if equipped)
(P.219)
Select to enable/disable the
Dynamic Radar Cruise Control with
Road Sign Assist.
■
Vehicle Settings

PBD (Power Back Door) (if
equipped) (P.97)
Select to set up the following items.
• System settings
Select to enable/disable the power
back door system.
• "Opening Adjustment"
Select the open position when power
back door is fully open.
• "Volume"
Select to set the volume of the buzzer
which sounds when the power back
door system operates.
*
: Vehicles with power back door

(Stop & Start) (if equipped)
(P.250)
Select to set the length of time the Stop
& Start system will operate when the
A/C
" " switch of the air conditioning sys-
tem is on.
■
 "Language"
Select to change the language on the
multi-information display.
 "Units"
Select to change the unit of measure
for fuel consumption.
 "Meter Type" (7-inch display)
Select to change the speedometer dis-
play.

Select to activate/deactivate the Eco
Driving Indicator Light.

*
Select to change the display on Fuel
Economy (P.72).

Select to enable/disable

• "Display Contents"
Select to enable/disable the AWD sys-
tem display (P.75). (AWD models)
• "Drive Info Type"
Select to change the drive information
type display between trip and total.
(P.74).
• "Drive Info Items"
Select to set the items on the upper and
lower side of the drive information
screen. from three items, average
speed, distance and total time.
 "Pop-Up Display"
2-1. Instrument cluster
Settings
(Eco Driving Indicator
Light) (if equipped) (P.73)
(Driving information display
settings)
(Audio settings)
(Vehicle information display
settings)
77
2
screen.